mirror of
https://gitlab.com/manzerbredes/ina260-zmq-publisher.git
synced 2025-04-06 03:46:25 +02:00
32 lines
No EOL
1.2 KiB
Makefile
32 lines
No EOL
1.2 KiB
Makefile
##### ZeroMQ
|
|
# ZMQ_PORT is the port used for all communications
|
|
ZMQ_PORT=5556
|
|
# SUBSCRIBER_ADDR is used by the publishers
|
|
# to contact the subscriber
|
|
SUBSCRIBER_ADDR=10.128.0.133
|
|
# ZMQ_TOKEN is used by ZeroMQ to detect
|
|
# messages from publishers. Leave as is if not sure.
|
|
ZMQ_TOKEN=ina260-zmq-publisher
|
|
# ZMQ_MSG_SIZE max number of bytes per ZeroMQ messages
|
|
# Be careful with this parameter. Default is 5MiB
|
|
# Units is bytes
|
|
ZMQ_MSG_SIZE=5242880
|
|
|
|
##### Loggers/Publisher
|
|
# LOG_DELAY defines the delay between 2 consecutive
|
|
# ina260 power read performed by the logger
|
|
# Unit is milliseconds
|
|
LOG_DELAY=1000
|
|
# SUBSCRIBER_DIR will contain all the measurments
|
|
# received from the publishers
|
|
SUBSCRIBER_DIR=./data
|
|
# LOG_INTERVAL determined the duration
|
|
# of a logging period. At the end of a logging period,
|
|
# a file with all the power measurements is generated by the loggers in LOGGERS_DIR
|
|
# This file, is then transmitted by the publishers to the subscriber
|
|
# Unit is seconds
|
|
LOG_INTERVAL=20
|
|
# KEY is attached to all the messages published by the node
|
|
# It allows you to filter the messages received on the client
|
|
# if you are using multiple monitoring nodes (multiple publishers)
|
|
KEY=node1
|