ina260-zmq-publisher/config.mk

##### ZeroMQ
# ZMQ_PORT is the port used for all communications
ZMQ_PORT=5556
# SUBSCRIBER_ADDR is used by the publishers
# to contact the subscriber
SUBSCRIBER_ADDR=10.128.0.133
# ZMQ_TOKEN is used by ZeroMQ to detect
# messages from publishers. Leave as is if not sure.
ZMQ_TOKEN=ina260-zmq-publisher
# ZMQ_MSG_SIZE max number of bytes per ZeroMQ messages
# Be careful with this parameter. Default is 5MiB
# Units is bytes
ZMQ_MSG_SIZE=5242880

##### Loggers/Publisher
# LOG_DELAY defines the delay between 2 consecutive
# ina260 power read performed by the logger
# Unit is milliseconds
LOG_DELAY=1000
# SUBSCRIBER_DIR will contain all the measurments
# received from the publishers
SUBSCRIBER_DIR=./data
# LOG_INTERVAL determined the duration
# of a logging period. At the end of a logging period,
# a file with all the power measurements is generated by the loggers in LOGGERS_DIR
# This file, is then transmitted by the publishers to the subscriber
# Unit is seconds
LOG_INTERVAL=20
# KEY is attached to all the messages published by the node
# It allows you to filter the messages received on the client
# if you are using multiple monitoring nodes (multiple publishers)
KEY=node1