mirror of
https://gitlab.com/manzerbredes/ina260-sysfs-driver.git
synced 2025-04-22 21:48:25 +00:00
23 lines
No EOL
1.1 KiB
Markdown
Executable file
23 lines
No EOL
1.1 KiB
Markdown
Executable file
# INA260-sysfs-driver
|
|
|
|
Link to the [ina260 datasheet](https://www.ti.com/lit/gpn/INA260).
|
|
|
|
## Installation
|
|
|
|
$ make
|
|
$ sudo insmod ina260.ko
|
|
|
|
## Managing INA260 devices
|
|
- Add device: `echo ina260 [devaddr] > /sys/bus/i2c/devices/<bus>/new_device`
|
|
- Delete device: `echo [devaddr] > /sys/bus/i2c/devices/<bus>/delete_device`
|
|
|
|
## Sysfs structure
|
|
- Overview: `tree /sys/kernel/ina260`
|
|
- You can access to each device registers in `/sys/kernel/ina260/<device>/registers/`
|
|
- You can access to each device register fields in `/sys/kernel/ina260/<device>/fields/`
|
|
- You can access to the currently measured current, voltage and power via `/sys/kernel/ina260/<device>/<power|current|voltage>` (units are watts, amperes and volts respectively)
|
|
|
|
For more informations on the registers/fields, please refer to the [ina260 datasheet](https://www.ti.com/lit/gpn/INA260).
|
|
|
|
## Notes
|
|
- Tested so far on a [Beaglebone Black](https://www.beagleboard.org/boards/beaglebone-black) with a [Mikrobus Cape](https://www.mikroe.com/beaglebone-mikrobus-cape) with up to four ina260 devices attached. |