diff --git a/README.md b/README.md
index 794fa29..c882733 100644
--- a/README.md
+++ b/README.md
@@ -2,8 +2,7 @@
 
 A ZeroMQ-based power monitoring publisher for the ina260 chip.\
 This repository provides:
-- `logger`: that collects power measurements from the ina260 using the dedicated driver
-- `publisher`: that continuously publish the logger's data  using the ZeroMQ pub/sub communication pattern
+- `publisher`: that collects power measurements from the ina260 using the dedicated driver with a thread that continuously publish the power measurements data using the ZeroMQ pub/sub communication pattern
 - `subscriber`: a program that collects the measurements published by the publishers (used to create a broker, frontend etc...)
 
 *Note: Nothing is stored locally! Everything that is published by the publishers is either received by the subscriber or lost.*
diff --git a/config.mk b/config.mk
index 15dd5d6..0414658 100644
--- a/config.mk
+++ b/config.mk
@@ -1,4 +1,4 @@
-##### ZeroMQ
+##### Network Communications
 # ZMQ_PORT is the port used for all communications
 ZMQ_PORT=5556
 # SUBSCRIBER_ADDR is used by the publishers
@@ -12,21 +12,20 @@ ZMQ_TOKEN=ina260-zmq-publisher
 # Units is bytes
 ZMQ_MSG_SIZE=5242880
 
-##### Loggers/Publisher
+##### Publishers/Subscriber
 # LOG_DELAY defines the delay between 2 consecutive
 # ina260 power read performed by the logger
 # Unit is milliseconds
-LOG_DELAY=1000
+LOG_DELAY=0
 # SUBSCRIBER_DIR will contain all the measurments
 # received from the publishers
 SUBSCRIBER_DIR=./data
 # LOG_INTERVAL determined the duration
 # of a logging period. At the end of a logging period,
-# a file with all the power measurements is generated by the loggers in LOGGERS_DIR
-# This file, is then transmitted by the publishers to the subscriber
+# all the measurements are send by a publisher thread
 # Unit is seconds
 LOG_INTERVAL=20
-# KEY is attached to all the messages published by the node
-# It allows you to filter the messages received on the client
+# KEY is attached to all the messages published to the subscriber
+# It allows you to filter the messages on the publisher
 # if you are using multiple monitoring nodes (multiple publishers)
 KEY=node1
\ No newline at end of file