esds/tests/api_send_eth0_1s1r/out

[t=0.000,src=n0] Send 1 bytes to n1 on eth0
[t=1.000,src=n1] Receive 1 bytes on eth0
[t=1.000,src=n1] Received: Hello World!
[t=1.000,src=n0] Send 1 bytes to n1 on eth0
[t=2.000,src=n1] Receive 1 bytes on eth0
[t=3.000,src=n0] Send 1 bytes to n1 on eth0
[t=3.000,src=n1] Received: Hello World!
[t=3.000,src=n1] Turned off
[t=4.000,src=n1] Turned on
[t=4.000,src=n0] Send 10 bytes to n1 on eth0
[t=5.000,src=n1] Receive failed code=-1
[t=5.000,src=n1] Turned off
[t=6.000,src=n1] Turned on
[t=7.000,src=n1] Receive failed code=-1
[t=14.000,src=esds] Simulation ends
Init ESDS repository 2022-06-09 21:48:32 +02:00			`[t=0.000,src=n0] Send 1 bytes to n1 on eth0`
			`[t=1.000,src=n1] Receive 1 bytes on eth0`
			`[t=1.000,src=n1] Received: Hello World!`
			`[t=1.000,src=n0] Send 1 bytes to n1 on eth0`
			`[t=2.000,src=n1] Receive 1 bytes on eth0`
			`[t=3.000,src=n0] Send 1 bytes to n1 on eth0`
			`[t=3.000,src=n1] Received: Hello World!`
			`[t=3.000,src=n1] Turned off`
			`[t=4.000,src=n1] Turned on`
Change API. Indeed, currently wired communications are aborted when receiver node turned off. This may not be desire when implementing UDP communications. Now user can use a boolean when using send()/sendt() to change this behavior. 2022-07-01 10:03:54 +02:00			`[t=4.000,src=n0] Send 10 bytes to n1 on eth0`
Init ESDS repository 2022-06-09 21:48:32 +02:00			`[t=5.000,src=n1] Receive failed code=-1`
Change API. Indeed, currently wired communications are aborted when receiver node turned off. This may not be desire when implementing UDP communications. Now user can use a boolean when using send()/sendt() to change this behavior. 2022-07-01 10:03:54 +02:00			`[t=5.000,src=n1] Turned off`
			`[t=6.000,src=n1] Turned on`
			`[t=7.000,src=n1] Receive failed code=-1`
			`[t=14.000,src=esds] Simulation ends`